PRODUCT DESCRIPTION

Single-component, Brownish clear liquid coating, transparent appearance, which seals concrete and other absorbent surfaces.

ADVANTAGES

  • Excellent adhesion to almost all surfaces like concrete, wood, metal, mosaic tiles, A.C. Sheets etc.
  • Resistant to temperatures upto 90° C to 100° C. Will not crack, spall, peel or disintegrate in wide temperature variations.
  • Can be used on mosaic.
  • Can be used as primer or as base coat for waterproofing before painting.
  • Resistance to mild acids, alkalies, oil, grease, moisture, detergents etc.
  • Seals porous substrates, creates a barrier against water, moisture and atmospheric impurities.
  • No skilled labour required. Economical, durable, brushable, sprayable waterproof coating.

APPLICATIONS

  • Waterproofing of terraces, roofs,cleanwaterproofer parapet walls, chajjas, exterior walls of buildings, etc.
  • For chemical resistance against mild acids, alkalies in factories of processing houses.
  • As an anti-corrosive primer for metal surfaces under chassis of vehicles, steel structures, G.I., roofs, pipes, machinery.
  • As a primer before painting or primer coat before Crackseal compound/Joint Filler Compound.
  • As a sealer compound on absorbent surfaces and primer coat for Chemistik White Water Proofer Coating & other coatings as specified.

PREPARATION

  • Remove all existing treatments if any.
  • Clean the surface as well as cracks of dust, loose particles, oil, grease etc.
  • Fill the visible cracks, joints, gaps with Chemistik Joint Filler/Crackseal compound.
  • Allow to dry for 24 hours and observe the filling area. If required, fill the cracks once again to the level of the surface.

METHOD OF APPLICATION

  • Stir the contents thoroughly.
  • Apply on prepared surface one coat of Chemistik Clear Waterproof Coating. Allow to dry for 4 to 6 hours.
  • Apply second coat of Clear Waterproofer. If subsequent coats are required, it should be applied after a interval of 6 hours, between each coat.

cleanwaterproofer1CLEANING OF TOOLS

Wash all containers, brushes, tools and hands with mineral turpentine.

STORAGE

Store in a cool, dry place, away from direct sunlight.

PRECAUTIONS

Being inflammable , it should be stored in a cool, dry place away from heat and naked flames.
Working area should be ventilated. Smoking should not be permitted during application.

PACKING

Available in packagings of 1/2, 1,  4, 20 litres.

PRODUCT DATA
Clear Water Proofer

Color Clear liquid
Film Property Flexible Tack Free Clear film.
Coverage First coat smooth surface 80 to 90 sq. ft./ltr.

Second coat smooth surface 100 to 110 sq. ft./ltr.

Flash Point Above 30&deg C